![AlwaysSunnyintheShop](/img/default-banner.jpg)
- Видео 86
- Просмотров 1 451 779
AlwaysSunnyintheShop
США
Добавлен 6 июл 2017
I'm Aaron. It's Always Sunny in my Arizona shop. Check back for projects on the Monarch metal lathe, Sharp Milling machine, restoring bench grinders, drill presses, bench vises, and more.
Dorian Tool Post Review and Test! Monarch Lathe
A brand new Dorian Tool International SDN40CA wedge lock tool post has landed. Finally getting a proper tool post for the Monarch that has been a long time coming. Thanks to Dorian Tool for their support of the channel!
Contact me:
AlwaysSunnyintheShop@gmail.com
Contact me:
AlwaysSunnyintheShop@gmail.com
Просмотров: 9 118
Видео
I need help! Lots of it...
Просмотров 7 тыс.2 года назад
I'm back! I've got some updates to the shop and I need your help. You'll see why in the video. Contact me: AlwaysSunnyintheShop@gmail.com
Modifying a Sumitomo 10" Long Wave Mill
Просмотров 13 тыс.3 года назад
Relieving the neck on a 10" long Sumitomo Wave Mill. I also cut 1" off the end of it to fit the application I have for a customer at work. Simple stuff, but I supported the end of the cutter in an unusual way. Contact me: AlwaysSunnyintheShop@gmail.com
Bison 6 Jaw Set-Tru Chuck - Setup to 0.0002" TIR!!
Просмотров 19 тыс.3 года назад
Major chuck upgrade time for the Monarch lathe. I purchased a brand new 10" Bison Set Tru 6 jaw chuck. In this video I take it apart to clean and inspect it (and smash my thumb), then get it set up on the lathe. Contact me: AlwaysSunnyintheShop@gmail.com
Grooving and Boring and Turning, Oh My! Monarch Lathe Action
Просмотров 25 тыс.3 года назад
Finally finished the wrap up video for the parts on Adam's Namseon engine lathe. It's always hard to work from a severely worn part as your only reference, but I made it work and the lathe has been back in service with no trouble. Contact me: AlwaysSunnyintheShop@gmail.com
Machining a hardened gear and new shaft (Lathe Repair)
Просмотров 15 тыс.3 года назад
Continuing on with making replacement parts for my friend Adam. This pinion gear and shaft were completely ruined by corrosion, so I make a new shaft after boring the gear out and prepping it to be welded on the new shaft. Contact me: AlwaysSunnyintheShop@gmail.com
Making bronze bushings on a lathe, for a lathe
Просмотров 13 тыс.3 года назад
Time to make some parts for a friend's lathe. Adam bought a used Acra lathe at auction and it had some nasty surprises in the apron. Time to get him fixed up with new parts. To see Adam's work: Instagram: biltwellironco Website: biltwellironco.com Contact me: AlwaysSunnyintheShop@gmail.com
Making a Lathe Quick Change Tool Holder Rack
Просмотров 17 тыс.3 года назад
Time to solve an annoying problem for my lathe toolholders. I keep my Aloris CA quick change tool holders in one of the drawers of my Lista cabinet, and they slide around. I don't have a 3D printer so I made a rack the old fashioned way- steel! I also experiment with a solid carbide drill from Kennametal, a GoDrill. Contact me: AlwaysSunnyintheShop@gmail.com
Quick and Dirty Lathe Tool Height Gage
Просмотров 33 тыс.3 года назад
Making a simple, but accurate lathe tool height gage. I've been meaning to make one of these for a while and finally got around to it. I also show off my Sky Hook crane, and we talk about some of the topics that came up in the last video. Contact me: AlwaysSunnyintheShop@gmail.com
Modifying My Cambo Studio Stand for Longer Reach
Просмотров 5 тыс.3 года назад
Last week I showed my new studio stand for filming in the shop. In this video I show how I decided to make a longer arm for it. Had some struggles with the inserts I chose- they're so sharp that it was tricky to get chips to break when I didn't want to take heavy cuts, but a feed rate that was too fast just skipped over material. Had a lot of fun with this long bar. Contact me: AlwaysSunnyinthe...
Maximizing Expensive Material | Making a Bronze Bushing
Просмотров 16 тыс.3 года назад
I'm back! A few shop updates and some work on a vise I've been messing with for a while. Hopefully I'll get some motivation to make more videos- I really enjoy it but it's a lot of work and the world is falling apart, so I'm distracted. Email me: AlwaysSunnyintheShop@gmail.com
Monarch Lathe Installing ACURITE DRO Z Scale
Просмотров 17 тыс.3 года назад
Finally edited the video from installing the DRO Z scale. So far so good using the machine with it- just needs a few tweaks and we're in business! Contact me: AlwaysSunnyintheShop@gmail.com
FINALLY! Installing the X Axis DRO Scale on the Monarch Lathe
Просмотров 11 тыс.3 года назад
Finally time to get one of the scales installed on the lathe. This required me to remove the back end of the saddle to route the cable, conduct a bit of surgery on the casting, and drill and tap for cable control clamps. Inching toward completion of this upgrade! Contact me: AlwaysSunnyintheShop@gmail.com
Tailstock Bumper for the Monarch- Say 'NO' to Smashing DRO Scales
Просмотров 7 тыс.3 года назад
Quick project as part of the DRO install- a hard stop bumper to prevent the tailstock ever hitting the guard on the DRO scale. Music rather than shop sounds and talking- some people like it, some hate it, but it just seemed like the way to go for this video. Thanks for watching! Contact me: AlwaysSunnyintheShop@gmail.com
Monarch Lathe DRO Scale Mounting Bar and Guard
Просмотров 9 тыс.3 года назад
More (slow) progress on the DRO install. I got the cross slide drilled and tapped, made the scale mounting bar, and made a guard to protect the scale. Next up will be making a stop to prevent the tailstock from crashing into the scale and hopefully getting the first scale mounted. Contact me: AlwaysSunnyintheShop@gmail.com
Monarch Power Compound Disassembly | Milling the Cross Slide
Просмотров 13 тыс.3 года назад
Monarch Power Compound Disassembly | Milling the Cross Slide
Monarch Power Compound Disassembly | Gears Everywhere!
Просмотров 15 тыс.3 года назад
Monarch Power Compound Disassembly | Gears Everywhere!
Making a Lathe Tailstock Tapping Chuck Adapter
Просмотров 18 тыс.4 года назад
Making a Lathe Tailstock Tapping Chuck Adapter
Always Sunny in the Shop 10,000 Subscribers Giveaway!!
Просмотров 4,4 тыс.4 года назад
Always Sunny in the Shop 10,000 Subscribers Giveaway!!
Power Tapping for Cheaters! New Tap Adapters for Easy Threading
Просмотров 49 тыс.4 года назад
Power Tapping for Cheaters! New Tap Adapters for Easy Threading
Roll In Saw Fixture Locks Complete! Machining and Assembly
Просмотров 14 тыс.4 года назад
Roll In Saw Fixture Locks Complete! Machining and Assembly
Customizing Heinrich Vises plus a Broken Drill :(
Просмотров 12 тыс.4 года назад
Customizing Heinrich Vises plus a Broken Drill :(
Roll In Saw Motor and Drive Wheel Removal
Просмотров 6 тыс.4 года назад
Roll In Saw Motor and Drive Wheel Removal
Machining with a DeWalt Right Angle Drill Attachment?!
Просмотров 14 тыс.4 года назад
Machining with a DeWalt Right Angle Drill Attachment?!
Making a Knob from Scratch with 4140 Alloy Steel
Просмотров 19 тыс.4 года назад
Making a Knob from Scratch with 4140 Alloy Steel
Making Shallow Threaded Holes with Customized Tools
Просмотров 12 тыс.4 года назад
Making Shallow Threaded Holes with Customized Tools
Roll In Saw: Machining the Table - Difficult Setup!!
Просмотров 15 тыс.4 года назад
Roll In Saw: Machining the Table - Difficult Setup!!
Roll In BandSaw Disassembly and Installing New Tires
Просмотров 9 тыс.4 года назад
Roll In BandSaw Disassembly and Installing New Tires
New Machine Day Roll-In Band Saw! Plus Painting a Baldor Grinder
Просмотров 11 тыс.4 года назад
New Machine Day Roll-In Band Saw! Plus Painting a Baldor Grinder
Organizing Machine Shop Tools with Aaron: feat. Smokey and Kolby
Просмотров 63 тыс.4 года назад
Organizing Machine Shop Tools with Aaron: feat. Smokey and Kolby
Hmmm I'm not to excited about cutting an oring groove haha. This one looks great
I don't know where you are taking those numbers from but 16 pieces of 4-groove elements plus 64 dividers is US$ 169,95. THIS FCUKIN EXPENSIVE thing!
great video! where'd you get the material from?
If your gauge blocks are accurate enough and in good condition they should wring together.
Why in the world did you buy a solid piece ! You could have gone to McMaster carr and bought one closer to the I'd and probably. 6 inches long , nice work but a waste of time and money
Dude, are you a Wobbly?
the ways is many and different, i use a center drillbit in the chuck and set my tool to match the point of the drillbit - fast,easy and works perfect for me
Bızde de var tezgehtan
Entera chanta la página no recordable
how many hp is the lathe
The 3 videos on the Lisle 91000 grinder were very helpful as I am missing some of the same parts on one I bought recently. One suggestion: instead of calling a part "this guy" use the name found in the instruction manual--it would help avoid any confusion.
sick shirt.
Are you still kicking? Could use another video from you if you aren’t too busy!
Is that the original color for that monarch? I have one that was built late 12kk from 1940 that was repainted gray, but under the gray is that color green that you have.
What type of fabric did you use?
Turn the feed rod by hand to get the gears to mesh!
Nice job! 👍
U ok u dropped off the face of the earth
Great video. I love the attention to detail.
My method for using the foam is to first use the razor knife to cut the outside profile, then I use my dremel tool with a base plate and a straight bit to create the recess. With this setup it's easy to cut recesses of varying depths for tools with complex shapes. The bottom of the recesses will be smooth and consistent.
Love the size of your machine and I think the color is perfect. Someone spent a good amount of time buffing the chrome handles, just beautiful. I am looking around now for a similar machine. Thank You, Ric
A comment if I may? That skyhook base attachment into those thin cast iron flanges on your top slide, combined with the the significant lever arms and the mass of the chuck is a recipe for disaster. Do not be surprised if one day the whole assembly tears out - with the associated tears.
Right tool for the job kinda situation. There’s nowhere near enough torque to take a .25 depth of cut on a lathe that size. We have a Puma 400 CNC lathe with an 18” chuck and I wouldn’t try taking .250 on that either. On a big machine with a lot of horsepower and a lot of torque, you can take .250-.300 all day long. But on a smaller machine all you’re going to do is tear things up and get them out of alignment. Best course of action if trying to save time and get a job done faster is to ramp up the surface footage and feed and lighten up the depth of cut.
What angle this the gravity feed rails?
Side note. I noticed the lock ring on your tool holder adjustment uses a setscrew instead of the common double nut setup. Great idea as I find the double nut often changes the setting when I lock it. Thanks, I'll try it.
Thanks for making the video. I'm working on a Roll-In Saw table at the moment - same issue. Can you explain how you attached the steel bars to the table and to each other? Thanks..
It takes a lathe to make bushings for a lathe. How was the first lathe made?
A oldtimer ones told me. Steel is like a hungry baby. If it starts screaming and the chips don't break, slow the speed and up the feed.
That is a really cool machine. There is actually on for sale me. I would love to buy it but I don't know if I could even move a 9000lb machine lol.
watching you wreck that chuck was fascinating. NOT
would you make a part for my 91000??
Any leads on that white wheel - where to buy? I cannot seem to find a white wheel with right arbor and width.
where did you buy your QcTp
why would you want to cut that deep on a single cut though?
Nice lathe. But I would have to repaint it. LOL i am old school grey.
Why did you disappear …. I was waiting for the next video
Hi Aaron. I’m the proud new owner of a series 61 20x78 monarch. Looks like my situation will be similar to yours as far as the rigging goes. I’d like to get some more information about the skates you used to bolt to the machine. My plan is to get it on skates and drag it onto a tilt deck trailer. The trailer has a 12k winch on it. Do you think this is doable? I guess second option will be to hire a flat bed wrecker like you did, but I’m thinking if it’s on skates I don’t see any reason the tilt deck wouldn’t work. Thoughts? Thanks
Hi Nick. I made a video on making the skates I ended up using to move my Monarch that you can check out. If the drop deck trailer is long enough then I would think you'd be fine using it. It was pretty nerve-wracking to winch this much weight up the wrecker, so I'd definitely go with a trailer if it were an option.
Overkill.....
Hey Aaron, Just saw your vid here and thanks for posting as I am looking to buy a six jaw for my newly acquired 13" Southbend. I'm looking at the Pratt-Bernerd and the Bison, but maybe I can only afford the Shars..😳 I'll post a vid when I get one.. Take care, Razor!
Nice old heavy lathe but, without a foot brake, I wouldn’t have it in my shop.
Very nicely done. Every Wilton I have worked on has quality control issues. Apparently it doesn't make them any less collectible, and they can definitely be used.
Loose hanging necklace in the workshop, that's a written warning for le apprentice
What happened to the tool post mounting stud could have produced a sudden failure of the tool post during large DOC cuts. If the tool post mounting were to snap off, the tool post and lots more would become a lethal projectile. If any threaded fastener feels "soft or stretched" when torqued, remove it if possible and give it the Naval float test.. or put that ALL those threaded parts into the circular file never to find their way on to any mech device ever again. Metals are far from solid, they are more like rubber and deforms a lot more than folk realize or accept. What happened to the tool post mounting stud, the yield point of the material was exceeded. Once this has happened, it is ripe for failure.. Take the time to watch this video on metals and material science of what yield point means and why materials behave in the ways they do. ruclips.net/video/WSRqJdT2COE/видео.html Never skimp or take for granted threaded parts or any parts made of metal or similar materials, knowledge and understanding of materials is an essential aspect of machine tool work.
Thay are oil nipls not greas
Stunning lathe .... I wonder what the ticking noise is when the lathe is running
Bagus
Beautiful machine, shame to dirty it.
You need to mount your tool holders closer to the lathe
Did you pick up a new CNC machine?! New to you?
Nice chuck Bud!